您好,欢迎您来到:苏州市bet官网入口官网!服务热线:0512-62751429.
YUSH Electronic
资讯动态
铡刀式分板机的优势与使用方法
铡刀式分板机采用上下双直刀设计,适用于各种印刷电路板、发光二极管铝板、木板、铜板等,是板材种类繁多、受力较低、分割板毛刺较少、板边较光滑、对分割板质量要求较高的最佳板材类型之一。铡刀式分板机受力小,分割板质量高,铡草机开口小,只能送入板内,保证了操作人员的安全。它适用于分割各种材料的基板,也适用于高硬度的铝基板和铜基板。
It is one of the best board types with various types of plates, low stress, less burr, smooth edge and high quality requirements for the cutting board. The cutter type plate splitter has the advantages of small force, high quality of cutting board and small opening of grass cutter, which can only be sent into the board, thus ensuring the safety of operators. It can be used to separate substrates of various materials, as well as aluminum and copper substrates with high hardness.
铡刀式分板机采用双直刀设计,采用进口优质高速钢制造。其使用寿命更持久,可达300万次,可研磨两次。独特的新技术将切割过程中的压力降至最低,使产品质量更好。调节按钮可根据板厚精确调节上下刀之间的距离,避免因V型槽深度不同而造成的刀具损失。
The cutter type plate splitter adopts double straight blade design and is made of imported high-quality high-speed steel. Its service life is longer, up to 3 million times, and can be ground twice. The unique new technology will reduce the pressure in the cutting process to the minimum, so that the product quality is better. The adjustment button can accurately adjust the distance between the upper and lower cutters according to the plate thickness, so as to avoid the tool loss caused by the different depth of the V-groove.
铡刀式分板机的使用方法如下:
The usage of the cutter type plate splitter is as follows:
1、操作前确认设备是否正常。正式开始工作前,设备应试运转约2分钟,看工具是否上下移动,电路和气路是否畅通,确认正常后方可开始工作。
 Confirm whether the equipment is normal before operation. Before the formal start of work, the equipment should be put into trial operation for about 2 minutes to see whether the tools move up and down, whether the circuit and gas path are smooth, and start to work after confirming that they are normal.
2、严格按照操作说明工作。安全事故通常是由员工的不规范操作造成的。因此,在使用切草机式铝基板/印刷电路板/发光二极管板分离器时,必须注意操作的标准化。
Work in strict accordance with the operating instructions. Safety accidents are usually caused by staff's nonstandard operation. Therefore, attention must be paid to the standardization of operation when using grass cutter type aluminum substrate / printed circuit board / LED board separator.
3、强化工业生产的安全意识。始终加强工作目标的安全,避免因操作失误而损害人身安全。
Strengthen the safety awareness of industrial production. Always strengthen the safety of work objectives to avoid personal safety damage due to operational errors
4、加工时,印刷电路板的V型槽应与直刀的边缘对齐,这样分离后的板毛刺较少,减少了刀的磨损,也提高了工作效率。
During processing, the V-groove of printed circuit board should be aligned with the edge of the straight knife, so that the separated board burr is less, the wear of the cutter is reduced, and the working efficiency is improved.
上述所讲解的就是铡刀式分板机的优势与使用方法,希翼看完能够对您有所帮助,如果您想要了解更多关于铡刀式分板机的相关信息的话,欢迎在线咨询客服或是拨打本企业服务热线(网站右上角)进行咨询,bet官网入口将竭诚为您提供优质的服务!
What is explained above is the advantages and use method of the cutter type plate splitter. I hope that it can help you after reading. If you want to know more about the cutter type plate splitter, please contact customer service online or call our service hotline (top right corner of the website) for consultation. We will provide you with high-quality service wholeheartedly!
产品分类
                                  当前位置: bet官网入口 -> 资讯动态

                                  铡刀式分板机的优势与使用方法


                                  铡刀式分板机采用上下双直刀设计,适用于各种印刷电路板、发光二极管铝板、木板、铜板等,是板材种类繁多、受力较低、分割板毛刺较少、板边较光滑、对分割板质量要求较高的最佳板材类型之一。铡刀式分板机受力小,分割板质量高,铡草机开口小,只能送入板内,保证了操作人员的安全。它适用于分割各种材料的基板,也适用于高硬度的铝基板和铜基板。
                                  It is one of the best board types with various types of plates, low stress, less burr, smooth edge and high quality requirements for the cutting board. The cutter type plate splitter has the advantages of small force, high quality of cutting board and small opening of grass cutter, which can only be sent into the board, thus ensuring the safety of operators. It can be used to separate substrates of various materials, as well as aluminum and copper substrates with high hardness.
                                  铡刀式分板机采用双直刀设计,采用进口优质高速钢制造。其使用寿命更持久,可达300万次,可研磨两次。独特的新技术将切割过程中的压力降至最低,使产品质量更好。调节按钮可根据板厚精确调节上下刀之间的距离,避免因V型槽深度不同而造成的刀具损失。
                                  The cutter type plate splitter adopts double straight blade design and is made of imported high-quality high-speed steel. Its service life is longer, up to 3 million times, and can be ground twice. The unique new technology will reduce the pressure in the cutting process to the minimum, so that the product quality is better. The adjustment button can accurately adjust the distance between the upper and lower cutters according to the plate thickness, so as to avoid the tool loss caused by the different depth of the V-groove.
                                  铡刀式分板机的使用方法如下:
                                  The usage of the cutter type plate splitter is as follows:
                                  1、操作前确认设备是否正常。正式开始工作前,设备应试运转约2分钟,看工具是否上下移动,电路和气路是否畅通,确认正常后方可开始工作。
                                   Confirm whether the equipment is normal before operation. Before the formal start of work, the equipment should be put into trial operation for about 2 minutes to see whether the tools move up and down, whether the circuit and gas path are smooth, and start to work after confirming that they are normal.
                                  2、严格按照操作说明工作。安全事故通常是由员工的不规范操作造成的。因此,在使用切草机式铝基板/印刷电路板/发光二极管板分离器时,必须注意操作的标准化。
                                  Work in strict accordance with the operating instructions. Safety accidents are usually caused by staff's nonstandard operation. Therefore, attention must be paid to the standardization of operation when using grass cutter type aluminum substrate / printed circuit board / LED board separator.
                                  3、强化工业生产的安全意识。始终加强工作目标的安全,避免因操作失误而损害人身安全。
                                  Strengthen the safety awareness of industrial production. Always strengthen the safety of work objectives to avoid personal safety damage due to operational errors
                                  4、加工时,印刷电路板的V型槽应与直刀的边缘对齐,这样分离后的板毛刺较少,减少了刀的磨损,也提高了工作效率。
                                  During processing, the V-groove of printed circuit board should be aligned with the edge of the straight knife, so that the separated board burr is less, the wear of the cutter is reduced, and the working efficiency is improved.
                                  上述所讲解的就是铡刀式分板机的优势与使用方法,希翼看完能够对您有所帮助,如果您想要了解更多关于铡刀式分板机的相关信息的话,欢迎在线咨询客服或是拨打本企业服务热线(网站右上角)进行咨询,bet官网入口将竭诚为您提供优质的服务!
                                  What is explained above is the advantages and use method of the cutter type plate splitter. I hope that it can help you after reading. If you want to know more about the cutter type plate splitter, please contact customer service online or call our service hotline (top right corner of the website) for consultation. We will provide you with high-quality service wholeheartedly!
                                  苏州bet官网入口 版权所有 @ Copyright 2015 联系人:刘小姐 地址:江苏省苏州市昆山市金阳东路1068号G栋厂房, 分板机宇顺力专业生产V-CUT分板机|电路板分板机|邮票孔分板机|pcb气动分板机|分板机厂家|线路板分板机|冲压分板机|铡刀分板机|PCB数控分板机|PCB曲线分板机|上海分板机|分板机刀具|分板机配件|FPC冲床分板机|LED铝基板分板机。《中华人民共和国电信与信息服务业务经营许可证》编号:苏ICP备14049770号-4
                                  联系bet官网入口
                                  分板机华南地址:
                                  分板机地址:广东省东莞市涌头村山泉路十号(总部)
                                  分板机咨询:13862072520
                                  分板机电话:0769-88087410
                                  分板机网址:
                                  华东分板机地址:
                                  分板机地址:江苏省苏州市昆山市金阳东路1068号(国瑞产业园)
                                  分板机电话:0512-62751429
                                  咨询分板机:13450659407
                                  分板机邮箱:seles@hk-yush.com
                                  分板机网址:http://www.yushunli.com
                                  苏州bet官网入口 版权所有 @ Copyright 2015 联系人:刘小姐 地址:江苏省苏州市昆山市金阳东路1068号G栋厂房, 分板机宇顺力专业生产V-CUT分板机|电路板分板机|邮票孔分板机|pcb气动分板机|分板机厂家|线路板分板机|冲压分板机|铡刀分板机|PCB数控分板机|PCB曲线分板机|上海分板机|分板机刀具|分板机配件|FPC冲床分板机|LED铝基板分板机。《中华人民共和国电信与信息服务业务经营许可证》编号:苏ICP备14049770号-4
                                  XML 地图 | Sitemap 地图